X

HP Deskjet 2600 Wireless Setup

The DJ2600 printer can be connected to the Wi-Fi by three methods. HP Deskjet 2600 Wireless Setup guidelines are given below.

123 HP DJ2600 Wireless Setup for Windows

  • To perform your HP Deskjet 2600 Wireless Setup, all you need is a computer connected to a network with Internet access.
  • Switch on your wireless router and the computer.
  • "Connect" the printer to the network to which the computer is connected.
  • Now, power on your printer.
  • On the input tray, load a stack of paper. Install the ink cartridges.
  • Situate the printer within range of your wireless router.
  • Now, on your computer, download the printer driver software from the manufacturer’s site, and run it.
  • "Select" your printer from the list. Tap the My Printer is Not Shown option if the printer is not listed.
  • Select Wireless network when prompted. Click Continue.
  • Follow the guided instructions as displayed on the screen to complete the setup.

123 HP DJ2600 Wireless Setup for Mac

  • The procedure for Hp Deskjet 2600 Wireless Setup on your Mac PC using the Wi-Fi Direct method is as follows.
  • Hold the Wireless and Resume buttons for more than five seconds on your Deskjet 2600 printer.
  • The Wi-Fi Direct icon on the Deskjet 2600 printer stays lit after the Wi-Fi Direct feature is enabled.
  • Tap the Wireless button and the Information button on your Deskjet 2600 printer.
  • The Print information gets printed. Locate the WPS PIN available in the Wi-Fi Direct section.
  • Power On your Deskjet 2600 printer and load white papers in it. Place the four ink cartridges into the respective slots.
  • Click on the Wireless icon on your Mac personal computer.
  • Select your HP Deskjet 2600 printer; it will have DIRECT mentioned in its name.
  • When instructed to enter the password, type 12345678; it is the default key to sign in.
  • Your HP Deskjet 2600 Wireless Setup process completed successfully.

How to Connect HP Deskjet 2600 to Wifi?

Connecting the 123 HP DJ2600 Printer to your Wi-Fi can be done in multiple ways. If the printer doesn’t have a control panel, the HP Deskjet 2600 wireless setup wizard method cannot be carried out. In such cases, you can establish a wireless connection via the WPS method or specify the connection type while you install the printer driver. Once you download the printer driver, the downloaded file will be saved in the .exe and .dmg format on the Windows & MAC operating systems respectively. Launch the installation wizard by clicking on the setup file. When the installer prompts you to specify a connection type, make sure to select the Wireless option and mention its SSID and WEP key. Your HP Deskjet 2600 printer will now connect to the available Wi-Fi network.

How to Enable Wi-Fi on HP Deskjet 2600

Quick Steps for Enable Wifi on DJ2600

  • To connect the Deskjet 2600 printer to a Wi-Fi network, go through the steps mentioned below.
  • The Deskjet printer can be connected to a network during the printer setup process. Keep your router turned on.
  • Download the driver for the printer. Install it using the steps mentioned on the installer screen.
  • Choose the Wireless option in the Connection Options screen.
  • After the printer name displays, choose the printer name and click the Ready to Connect option.
  • The printer automatically establishes the connection. Now, you need to add the printer name to the print queue.
  • Click the + sign to include the printer name. If the name does not display, remove and then re-add it to the queue.
  • Once the connection is established, try to print a network test page to check the connection status.

HP Deskjet 2600 Wireless Setup Password

To Find the Wireless password in the Windows:

  • You can find the password of the wireless network only when it is connected to your system.
  • From the Windows Computer linked to the wireless network, click the Start button.
  • Type “Network Connections” in the search bar.
  • Select the “View Network connections” option from the results.
  • Right-click the Wi-Fi connection to view options.
  • Click on the “Status” option.
  • In the Wi-Fi Status window, select “Wireless Properties.”
  • Then, click on the “Security” option and then click on “Show Character” checkbox to view the Network security key.

To Find the Wireless password on Mac:

  • To know the hp deskjet 2600 wireless setup password on Mac, go to the “Finder” menu.
  • In the Finder search bar, type “Keychain Access” and click Return.
  • Double click the Wi-Fi that you are using currently.
  • Now, click the “Show password” checkbox.
  • A dialog box opens asking you to input the “login” password.
  • Type the login password and hit the Enter key on your keyboard.
  • Now the connected Wi-Fi password will be shown.