X

How to Connect HP Deskjet 2622 to Wifi

The HP Deskjet 2622 printer supports wireless and Wi-Fi connectivity. Check if the printer has a Wi-Fi icon on the display panel. The printer and Windows/Mac computer have to be connected to the same wireless network. Follow the steps below to How to Connect HP Deskjet 2622 to Wifi.

How to Connect HP Deskjet 2622 to Wifi

To connect your HP Deskjet 2622 printer to a wireless network, all you need is a computer and stable internet access. Perform the instructions as given below to connect your 123.hp.com/dj2622 printer to a Wi-Fi network.

  • Switch on your 123.hp.com/setup 2622 printer, router, and the computer.
  • Make sure the printer and the computer are connected to the same wireless network.
  • Now, load paper and insert the ink cartridges into the printer.
  • Make sure to place the printer and the computer within the range of your wireless router.
  • You do not need a USB cable for wireless setup, so disconnect the cable if any from your printer.
  • Check if the power light on your printer is blinking. If the light is not bright, then press the Power button to wake the printer.
  • The Wireless light should blink on the printer control panel.
  • If the Wireless light is not blinking, then press & hold the Wireless and the Cancel buttons at the same time for 3 seconds.
  • Once the Wireless setup is done, proceed to install the software and print driver on your computer.
  • To install the HP Print driver on your system, follow the instructions given below.
  • Go to the manufacturer’s site, choose the print driver of your printer, and click the Download button.
  • Open HP Easy Start once the download process is done.
  • Perform the setup procedures as displayed on the HP Easy Start screen.
  • Select your printer on the Connect screen and click the Continue button.
  • Check if the network configuration settings are correct and click Join.
  • If it is incorrect, then select the correct network in the network name section and click the Join button.
  • Once the Wireless setup is done, HP Easy Start can connect your printer to the network.
  • Perform the instructions displayed on the screen to finish the installation.
  • Try a test print once the entire 123 hp setup is done.

123 HP Deskjet 2622 Wireless Setup

  • To use your HP Deskjet 2622 printer wirelessly, you need to install the software on the device that you are planning to connect to your printer.
  • Turn on the devices associated with the wireless setup - PC, router & printer.
  • Ensure that you have connected your PC to the wireless network.
  • Make sure the printer and PC are connected to the same network.
  • Complete the basic set up like loading paper, aligning print head, and installing the ink cartridges.
  • Make sure that you have placed the printer within the router’s range.
  • Now, you need to download the full-feature printer driver from the official manufacturer’s page. For more queries on How to Connect HP Deskjet 2622 to Wifi setup.
  • Once downloaded, launch the installation wizard.
  • Follow the prompts appearing on-screen to answer the wizard.
  • Select the My Printer Is Not Shown when prompted to choose your printer.
  • Click the Continue button on the 123.hp.com/dj2622 Printer Not Found Screen.
  • When you reach the Connection Type page, select the radio button against the Wireless Network option and click the Continue option.
  • Specify the SSID and pass-phrase of your network if prompted.
  • Proceed with the instructions on the succeeding setup screens to complete the wireless setup.

HP Deskjet 2622 Wireless Setup Mac

  • First, check if you have a stable, proper wireless network.
  • Perform the initial setup of the HP Deskjet 2622 printer and make sure to place it within the range of the router.
  • Install the printer driver on your Mac system. Key in your OS version and printer model number to download the drivers from the manufacturer’s site.
  • Launch HP Easy Start on your computer and choose the Set Up My HP Product option.
  • Read the Terms and Conditions properly and accept it.
  • Select Continue in the Prepare Screen that appears next.
  • The next screen will display the device that is ready to connect. Choose the device and click Continue.
  • In the next window, your printer and wireless network will be displayed with a Join option between them.
  • Check the printer and network, How to Connect HP Deskjet 2622 to Wifi details. If they are correct, select the Join option.
  • You can rename your printer if you want to.
  • Click the Allow button when the software requests you to access your wireless network.
  • Next, choose the HP Essential Software, HP easy Scan, and other necessary software that you want to install on your computer.
  • Add your printer after the installation and take a test print.

HP Deskjet 2622 Wireless Password

  • The WEP key is provided by your ISP or Internet Service Provider when you subscribe for a wireless connection.
  • You can also find the network password in the original paperwork that was offered with your wireless access point.
  • To get the password from your Windows personal computer, locate and then right-click on Wireless Network Tray.
  • Click Open Network and Sharing Center. Choose the Change Adapter Settings option and then right-click on your SSID name.
  • Select the Status tab and then choose the Security tab.
  • You can see the wireless security key once you mark on the Show Characters checkbox.
  • If you have a Mac system, click on the Go option from the Finder dialog box.
  • Select the Utilities option and open the Keychain Access app.
  • Choose the Local Items option in the KeyChains drop-down list. From the Categories list, click on the Passwords option.
  • Double-click on the name of your Wireless Fidelity network and choose the Show Password tickbox.
  • When prompted, type your admin key and then click on the OK button. For more queries on How to Connect HP Deskjet 2622 to Wifi Setup contact with our expert's.