How to Setup HP Envy 5055 Printer?

The HP Envy 5055 Printer supports Bluetooth. It is smart, and fast in terms of speed and has an improved Wi-Fi connectivity. Using HP Envy 5055 Install, you can scan, print and copy, borderless, high-quality documents and photos. The HP Smart application allows you to set up your wireless printer easily, print from social media or the cloud, Google Drive, such as iCloud, and Dropbox, scan documents with your camera. Whether connecting to your mobile device, network, Dual-Band Wi-Fi or Bluetooth Smart delivers a stable connection for consistent performance. By choosing an ink replenishment service, you can allow your printer to track its usage and have the ink delivered before you run out of ink. Below We Provide the Steps for How to Setup HP Envy 5055 Printer.

Setting Up HP Envy 5055 Printer for the First Time

  1. How to Setup HP Envy 5055 Printer - Remove the HP Envy 5055 Printer from the box and remove all the tape, packaging materials, stickers from the printer.
  2. Gently grasp the handles on both the sides of the printer and lift the ink cartridge access door till it locks into its place.
  3. Remove all the packaging material and tapes from inside the printer.
  4. Close the access door of the ink cartridge.
  5. Open the input tray door, pull it facing you to extend the paper tray, and then remove the packing tape.
  6. Push the input tray forward until it snaps into its place to close the input tray door.
  7. The packaging materials can be recycled.
  8. "Plug in one end of the power cord" to the rear port of the printer to start HP Envy 5055 Installation, and connect the other end of the power cord into an electrical outlet.
  9. Switch ON the printer. Set your preferences.
  10. When prompted, select the time and date, and then press Yes to confirm your choice.
  11. "Install the ink cartridges" that came along with your printer.
  12. Lift the access door of the ink cartridge till it snaps into place.
  13. Wait until the carriage is silent are you continue.
  14. Lift the lid on the slot of the ink cartridge.
  15. Hold the ink cartridge on its sides with the nozzles toward the printer.
  1. Press the ink cartridge forward into the slot till it snaps into the place.
  2. Close the access door of the ink cartridge.
  3. Open the input tray door, then pull it facing you to extend the paper tray.
  4. Move the paper width as far as possible.
  5. Load a stack of A4 size clean white paper.Do not load paper more than 250 sheets.
  6. Push the stack into the tray till it stops .
  7. Slide the paper guides till they reach the edge of the stack of paper.
  8. The guides should not be pushed very tightly that they bind against the paper.
  9. The input tray has to be pushed into the printer, and then press Done on the control panel of the printer.
  10. Pull the output tray from its position, and then lift the output tray extender.
  11. Align the ink cartridges. Lift the lid of the scanner.
  12. Place the alignment page on the scanner glass with the print side facing down.
  13. Close the scanner lid and press OK on the control panel of the printer.
  14. The hardware for your printer is now set up, and as the next step, you can do HP Envy 5055 Installation of the printing software.
  15. For clarifications & more info about how to setup hp envy 5055 printer, etc. Refer to the user manual on our website 123.hp.com/setup 5055.